Author Index

A

  • Abbasi, M. H. Synthesis of MoSi2-TiB2 Nanocomposite by Mechanical Alloying through Two Methods and Comparison of Their Properties for Use in Thermal Spraying Process [Volume 34, Issue 2, 2015, Pages 1-17]
  • Aghajani, H. Effect of Aluminium Injection into the Crystalizator on Type, Composition and Activity of Inclusions in Low Carbon Steel [Volume 34, Issue 1, 2015, Pages 9-23]
  • Ahmadi, S. Investigation of Crystallization Kinetics of Fe36Cr12Mo10 and α-Fe Phases in Devitrification of Fe51Cr18Mo7B16C4Nb4 Amorphous Alloy [Volume 34, Issue 1, 2015, Pages 45-53]
  • Alamolhoda, S. Effect of Excess Al in TiO2-Al Powder Mixture and Susceptor Material on Microwave Synthesis of TiAl/Al2O3 Composite [Volume 34, Issue 4, 2016, Pages 53-60]
  • Alizadeh, M. Effect of Al2O3 Particles on Mechanical Properties of Al-(0-40%)Al2O3 Composite Foams Produced by Low Energy Mechanical Alloying [Volume 34, Issue 1, 2015, Pages 1-8]
  • Alizadeh, M. Effect of Grain Size Reduction by Sodium Molybdate on Mechanical Properties of Al-0.7Fe Alloy [Volume 34, Issue 3, 2015, Pages 39-48]
  • Amiri, H. Synthesizing CoFe2O4 by Glass-Ceramic Method and Characterizing its Magnetic Properties in Na2O-Fe2O3-CoO-B2O3-SiO2 System [Volume 34, Issue 2, 2015, Pages 61-69]
  • Amooaghaie, R. Effets of Silver Salt Concentrations on Green Synthesis of Silver Nanoparticles Using the Plant Nigella Saliva [Volume 34, Issue 4, 2016, Pages 33-41]
  • Arabi Jeshvaghani, R. Investigation of Crystallization Kinetics of Fe36Cr12Mo10 and α-Fe Phases in Devitrification of Fe51Cr18Mo7B16C4Nb4 Amorphous Alloy [Volume 34, Issue 1, 2015, Pages 45-53]
  • Ashrafizadeh, F. Synthesis of MoSi2-TiB2 Nanocomposite by Mechanical Alloying through Two Methods and Comparison of Their Properties for Use in Thermal Spraying Process [Volume 34, Issue 2, 2015, Pages 1-17]
  • Ashrafizadeh, F. Effect of Discontinuous Ultrasonic Treatment on Mechanical Properties and Microstructure of Cast Al413-SiCnp Nanocomposites [Volume 34, Issue 1, 2015, Pages 87-103]
  • Ashrafizadeh, F. Effect of Grain Size on the Corrosion Behavior of 304L Stainless Steel [Volume 34, Issue 4, 2016, Pages 61-72]
  • Ashrafizadeh, F. Comparison of Super-Hydrophobicity and Corrosion Resistance of Micro-Nano Structured Nickel and Nickel- Cobalt Alloy Coatings on Copper Substrate [Volume 34, Issue 4, 2016, Pages 87-105]
  • Asjadi, F. Analysis of Structural and Magnetic Characteristics of Nickel Ferrite Nanoparticles Prepared by Hydrothermal Method [Volume 34, Issue 1, 2015, Pages 35-43]
  • Atapour, M. Investigation of the Mechanical Properties of AISI 316 Austenitic Stainless Steel and St 37 Low Carbon Steel Dissimilar Joint by Friction Stir Welding [Volume 34, Issue 2, 2015, Pages 89-101]
  • Atapour, M. Microstructure and Corrosion Behavior Investigation of Al5083-H321 GMAW Weldment in Sea Water [Volume 34, Issue 3, 2015, Pages 107-115]
  • Atapour, M. Effect of Grain Size on the Corrosion Behavior of 304L Stainless Steel [Volume 34, Issue 4, 2016, Pages 61-72]
  • Azizi1, M. Effets of Silver Salt Concentrations on Green Synthesis of Silver Nanoparticles Using the Plant Nigella Saliva [Volume 34, Issue 4, 2016, Pages 33-41]

B

  • Bahramian, A. Influence of Gr and MoS2 Particles on High Temperature Tribological Properties of Ni-SiC Composite Coating [Volume 34, Issue 1, 2015, Pages 105-121]
  • Bahramzadeh, S. Influence of Gr and MoS2 Particles on High Temperature Tribological Properties of Ni-SiC Composite Coating [Volume 34, Issue 1, 2015, Pages 105-121]
  • Bakhshi, S. R. Synthesis of Silicon Nitride by Mechanical Alloying and Heat Treatment [Volume 34, Issue 4, 2016, Pages 9-18]
  • Bakhshi, S.R. Influence of Gr and MoS2 Particles on High Temperature Tribological Properties of Ni-SiC Composite Coating [Volume 34, Issue 1, 2015, Pages 105-121]
  • Barekat, S.M. Fabrication of Yttria Nanopowder by Precipitation Method Using Micro Meter Powder [Volume 34, Issue 3, 2015, Pages 97-106]
  • Bassaki, S. Investigation of Photocatalytic Properties of NiO/TiO2 Layers Grown via PEO/EPD Method [Volume 34, Issue 3, 2015, Pages 87-95]
  • Bazzaz Bonabi, S. Influence of Parameters of Quenching and Partitioning Process on Microstructure and Fraction of Retained Austenite [Volume 34, Issue 2, 2015, Pages 79-87]
  • Beitollahi, A. Synthesizing CoFe2O4 by Glass-Ceramic Method and Characterizing its Magnetic Properties in Na2O-Fe2O3-CoO-B2O3-SiO2 System [Volume 34, Issue 2, 2015, Pages 61-69]
  • Bodaghi, F. Microstructure and Corrosion Behavior Investigation of Al5083-H321 GMAW Weldment in Sea Water [Volume 34, Issue 3, 2015, Pages 107-115]
  • Borhani, G.H. Synthesis of Silicon Nitride by Mechanical Alloying and Heat Treatment [Volume 34, Issue 4, 2016, Pages 9-18]

D

  • Dana, M.M. Effect of Grain Size on the Corrosion Behavior of 304L Stainless Steel [Volume 34, Issue 4, 2016, Pages 61-72]
  • Dashtbayazi, M.R. Optimizing Properties of Aluminum-Based Nanocomposites by Genetic Algorithm Method [Volume 34, Issue 2, 2015, Pages 19-30]
  • Dashtbayazi, M.R. Simulation of Elastic Properties of Polymer- Clay Nanocomposite [Volume 34, Issue 3, 2015, Pages 69-86]
  • Dehestani, M. Density Functional Theory Calculation on Improving the Photocatalytic Properties of Zinc Oxide and Cadmium Sulfide by Hybridization with Metal-Organic Framework [Volume 34, Issue 4, 2016, Pages 107-113]
  • Dehnavi, M.R. Effect of Discontinuous Ultrasonic Treatment on Mechanical Properties and Microstructure of Cast Al413-SiCnp Nanocomposites [Volume 34, Issue 1, 2015, Pages 87-103]
  • Doostmohammadi, A. Fabrication and Characterization of Novel Willemite Nanobioceramic for Bone Defect Repair [Volume 34, Issue 1, 2015, Pages 79-86]
  • Doostmohammadi, A. Preparation, Characterization and Comparative Study of Antibacterial Properties of Ag-TiO2 and ZnO-TiO2 Nanoparticles [Volume 34, Issue 4, 2016, Pages 43-52]

E

  • Esmaeili, R. Optimizing Properties of Aluminum-Based Nanocomposites by Genetic Algorithm Method [Volume 34, Issue 2, 2015, Pages 19-30]

F

  • Fazel, M. Influence of Gr and MoS2 Particles on High Temperature Tribological Properties of Ni-SiC Composite Coating [Volume 34, Issue 1, 2015, Pages 105-121]

G

  • Garsivaz jazi1, M.R. Influence of Gr and MoS2 Particles on High Temperature Tribological Properties of Ni-SiC Composite Coating [Volume 34, Issue 1, 2015, Pages 105-121]
  • Ghasemi, A. Investigating the Effect of Microstructure on Oxidation Behavior of Ti47Al48Mn5 Alloy Synthesized by Mechanical Alloying [Volume 34, Issue 2, 2015, Pages 31-48]
  • Ghasemi, A. Effect of Mg, Co and Ti Cations on Magnetic and Microwave Properties of SrFe12O19 Nanoparticles [Volume 34, Issue 4, 2016, Pages 19-31]
  • Ghasemi, S.S. Fabrication of Mullite-Alumina-SiC Composites by In-Situ Reaction during Carbothermal Reduction of Inorganic Materials [Volume 34, Issue 3, 2015, Pages 1-11]
  • Ghayebloo, M. Effect of Al-5Ti-B Inoculant Addition on the Graded Microstructure of Centrifugally Cast Al-13.8 wt.% Mg2Si Composite [Volume 34, Issue 2, 2015, Pages 49-59]
  • Ghotbi varzaneh, A. Effect of Isothermal Ageing on Structural and Magnetic Properties of Ni47Mn40Sn13 Ferromagnetic Shape Memory Alloy [Volume 34, Issue 3, 2015, Pages 29-38]
  • Golestani Fard, F. Investigation of Photocatalytic Properties of NiO/TiO2 Layers Grown via PEO/EPD Method [Volume 34, Issue 3, 2015, Pages 87-95]
  • Gordani, G. Effect of Mg, Co and Ti Cations on Magnetic and Microwave Properties of SrFe12O19 Nanoparticles [Volume 34, Issue 4, 2016, Pages 19-31]

H

  • Hadi, M. Investigating the Effect of Microstructure on Oxidation Behavior of Ti47Al48Mn5 Alloy Synthesized by Mechanical Alloying [Volume 34, Issue 2, 2015, Pages 31-48]
  • Haerifar, M. Effect of Current Density on Microstructure of Mn-Cu Thin Films produced by Electroplating Coating Technique [Volume 34, Issue 1, 2015, Pages 25-33]
  • Haghdoost, F. Preparation of Fabric Sensor for Heart Signal Acquisition Using Printing and Electroless Plating of Copper on Polyester Fabric [Volume 34, Issue 2, 2015, Pages 115-124]
  • Hajizamani, M. Effect of Grain Size Reduction by Sodium Molybdate on Mechanical Properties of Al-0.7Fe Alloy [Volume 34, Issue 3, 2015, Pages 39-48]
  • Honarbakhsh Raouf, A. Influence of Parameters of Quenching and Partitioning Process on Microstructure and Fraction of Retained Austenite [Volume 34, Issue 2, 2015, Pages 79-87]

J

  • Jafarpour, M. Effect of Aluminium Injection into the Crystalizator on Type, Composition and Activity of Inclusions in Low Carbon Steel [Volume 34, Issue 1, 2015, Pages 9-23]

K

  • Kalantar, M. Fabrication of Mullite-Alumina-SiC Composites by In-Situ Reaction during Carbothermal Reduction of Inorganic Materials [Volume 34, Issue 3, 2015, Pages 1-11]
  • Kalantar, M. Fabrication of Mullite-Alumina-SiC Composites by In-Situ Reaction during Carbothermal Reduction of Inorganic Materials [Volume 34, Issue 3, 2015, Pages 1-11]
  • Kameli, P. Effect of Isothermal Ageing on Structural and Magnetic Properties of Ni47Mn40Sn13 Ferromagnetic Shape Memory Alloy [Volume 34, Issue 3, 2015, Pages 29-38]
  • Karimi, H. Investigating the Effect of Microstructure on Oxidation Behavior of Ti47Al48Mn5 Alloy Synthesized by Mechanical Alloying [Volume 34, Issue 2, 2015, Pages 31-48]
  • Karimzadeh, F. Effect of Isothermal Ageing on Structural and Magnetic Properties of Ni47Mn40Sn13 Ferromagnetic Shape Memory Alloy [Volume 34, Issue 3, 2015, Pages 29-38]
  • Keshavarz Alamdari, E. Purification of Gold from Chloride Leach Liquor of Copper Anode Slime by Octanol-Kerosene Organic Extractant [Volume 34, Issue 2, 2015, Pages 71-78]
  • Khajelakzay, M. Fabrication of Yttria Nanopowder by Precipitation Method Using Micro Meter Powder [Volume 34, Issue 3, 2015, Pages 97-106]
  • Khajelakzay, M. Synthesis of Silicon Nitride by Mechanical Alloying and Heat Treatment [Volume 34, Issue 4, 2016, Pages 9-18]
  • Khayati, G. Effect of Al2O3 Addition as Diluent on Combustion Synthesis of Al2O3-ZrB2 Composite [Volume 34, Issue 4, 2016, Pages 1-8]
  • Khorsand, S. Comparison of Super-Hydrophobicity and Corrosion Resistance of Micro-Nano Structured Nickel and Nickel- Cobalt Alloy Coatings on Copper Substrate [Volume 34, Issue 4, 2016, Pages 87-105]
  • Khoshandam, B. Evaluation of Ability of Hydrogen Absorption in SAB-16/Pd Nanostructure Composite [Volume 34, Issue 3, 2015, Pages 13-27]
  • Khosrovaninezhad, A.H. Investigation of the Mechanical Properties of AISI 316 Austenitic Stainless Steel and St 37 Low Carbon Steel Dissimilar Joint by Friction Stir Welding [Volume 34, Issue 2, 2015, Pages 89-101]

M

  • Mahmoudi Meymand, M. Simulation of Elastic Properties of Polymer- Clay Nanocomposite [Volume 34, Issue 3, 2015, Pages 69-86]
  • Mashhadi, M. The Effects of NH4Cl and Particle Size of Al Powder in AlN Whiskers Synthesis by Direct Nitridation [Volume 34, Issue 1, 2015, Pages 55-66]
  • Mashreghi, A. Fabrication of Mullite-Alumina-SiC Composites by In-Situ Reaction during Carbothermal Reduction of Inorganic Materials [Volume 34, Issue 3, 2015, Pages 1-11]
  • Meraji, F. The Effects of NH4Cl and Particle Size of Al Powder in AlN Whiskers Synthesis by Direct Nitridation [Volume 34, Issue 1, 2015, Pages 55-66]
  • Mirkazemi, S. M. Synthesizing CoFe2O4 by Glass-Ceramic Method and Characterizing its Magnetic Properties in Na2O-Fe2O3-CoO-B2O3-SiO2 System [Volume 34, Issue 2, 2015, Pages 61-69]
  • Mirkazemi, S. M. Effect of PVP Additive on Properties of Cobalt Ferrite Nanoparticles Prepared by Hydrothermal Method [Volume 34, Issue 1, 2015, Pages 67-77]
  • Mirzaei, M. Effect of Al2O3 Particles on Mechanical Properties of Al-(0-40%)Al2O3 Composite Foams Produced by Low Energy Mechanical Alloying [Volume 34, Issue 1, 2015, Pages 1-8]
  • Mohammadi, S. Fabrication and Characterization of Novel Willemite Nanobioceramic for Bone Defect Repair [Volume 34, Issue 1, 2015, Pages 79-86]
  • Monshi, A. Preparation, Characterization and Comparative Study of Antibacterial Properties of Ag-TiO2 and ZnO-TiO2 Nanoparticles [Volume 34, Issue 4, 2016, Pages 43-52]
  • Mottaghitalab, V. Preparation of Fabric Sensor for Heart Signal Acquisition Using Printing and Electroless Plating of Copper on Polyester Fabric [Volume 34, Issue 2, 2015, Pages 115-124]

N

  • Naghizadeh, R. Investigation of Photocatalytic Properties of NiO/TiO2 Layers Grown via PEO/EPD Method [Volume 34, Issue 3, 2015, Pages 87-95]
  • Nayerhoda, R. Analysis of Structural and Magnetic Characteristics of Nickel Ferrite Nanoparticles Prepared by Hydrothermal Method [Volume 34, Issue 1, 2015, Pages 35-43]
  • Nemati, A. The Effects of NH4Cl and Particle Size of Al Powder in AlN Whiskers Synthesis by Direct Nitridation [Volume 34, Issue 1, 2015, Pages 55-66]
  • Niroumand, B. Effect of Discontinuous Ultrasonic Treatment on Mechanical Properties and Microstructure of Cast Al413-SiCnp Nanocomposites [Volume 34, Issue 1, 2015, Pages 87-103]

O

  • Otroj, S. Study of Nano-Titania Addition on Mechanical Strength of Mullite-Bonded Alumina-Silicon Carbide Nano-Composites [Volume 34, Issue 3, 2015, Pages 49-58]

P

  • Pezeshki, D. Effect of Al2O3 Addition as Diluent on Combustion Synthesis of Al2O3-ZrB2 Composite [Volume 34, Issue 4, 2016, Pages 1-8]
  • Pourestarabadi, S. Density Functional Theory Calculation on Improving the Photocatalytic Properties of Zinc Oxide and Cadmium Sulfide by Hybridization with Metal-Organic Framework [Volume 34, Issue 4, 2016, Pages 107-113]

R

  • Rabiee, S. M. Characterization of Nanonanocrystalline Mg-6Al-1Zn-1Si Alloy Powder During Mechanical Alloying and Subsequent Annealing [Volume 34, Issue 2, 2015, Pages 103-113]
  • Rabiee, S.M. Effect of Al2O3 Addition as Diluent on Combustion Synthesis of Al2O3-ZrB2 Composite [Volume 34, Issue 4, 2016, Pages 1-8]
  • Radmehr, P. Effect of Excess Al in TiO2-Al Powder Mixture and Susceptor Material on Microwave Synthesis of TiAl/Al2O3 Composite [Volume 34, Issue 4, 2016, Pages 53-60]
  • Raeissi, K. Comparison of Super-Hydrophobicity and Corrosion Resistance of Micro-Nano Structured Nickel and Nickel- Cobalt Alloy Coatings on Copper Substrate [Volume 34, Issue 4, 2016, Pages 87-105]
  • Rajabi, M. Characterization of Nanonanocrystalline Mg-6Al-1Zn-1Si Alloy Powder During Mechanical Alloying and Subsequent Annealing [Volume 34, Issue 2, 2015, Pages 103-113]
  • Rajabi, M. Effect of Al2O3 Addition as Diluent on Combustion Synthesis of Al2O3-ZrB2 Composite [Volume 34, Issue 4, 2016, Pages 1-8]
  • Ramazani, M. Influence of Gr and MoS2 Particles on High Temperature Tribological Properties of Ni-SiC Composite Coating [Volume 34, Issue 1, 2015, Pages 105-121]
  • Rashidzadeh, M. Investigation of Photocatalytic Properties of NiO/TiO2 Layers Grown via PEO/EPD Method [Volume 34, Issue 3, 2015, Pages 87-95]
  • Razmjouee, P. Effect of PVP Additive on Properties of Cobalt Ferrite Nanoparticles Prepared by Hydrothermal Method [Volume 34, Issue 1, 2015, Pages 67-77]
  • Rezaeian, A. Investigation of the Mechanical Properties of AISI 316 Austenitic Stainless Steel and St 37 Low Carbon Steel Dissimilar Joint by Friction Stir Welding [Volume 34, Issue 2, 2015, Pages 89-101]
  • Rostamizadeh, E. Synthesis of MoSi2-TiB2 Nanocomposite by Mechanical Alloying through Two Methods and Comparison of Their Properties for Use in Thermal Spraying Process [Volume 34, Issue 2, 2015, Pages 1-17]

S

  • Sadeghi, M. Investigating the Effect of Microstructure on Oxidation Behavior of Ti47Al48Mn5 Alloy Synthesized by Mechanical Alloying [Volume 34, Issue 2, 2015, Pages 31-48]
  • Sadeghi, N. Purification of Gold from Chloride Leach Liquor of Copper Anode Slime by Octanol-Kerosene Organic Extractant [Volume 34, Issue 2, 2015, Pages 71-78]
  • Saeri, M.R. Fabrication and Characterization of Novel Willemite Nanobioceramic for Bone Defect Repair [Volume 34, Issue 1, 2015, Pages 79-86]
  • Saeri, M.R. Study of Nano-Titania Addition on Mechanical Strength of Mullite-Bonded Alumina-Silicon Carbide Nano-Composites [Volume 34, Issue 3, 2015, Pages 49-58]
  • Saeri, M.R. Effets of Silver Salt Concentrations on Green Synthesis of Silver Nanoparticles Using the Plant Nigella Saliva [Volume 34, Issue 4, 2016, Pages 33-41]
  • Safari Kooshali, F. Evaluation of Ability of Hydrogen Absorption in SAB-16/Pd Nanostructure Composite [Volume 34, Issue 3, 2015, Pages 13-27]
  • Saidi, A. Effect of Mg, Co and Ti Cations on Magnetic and Microwave Properties of SrFe12O19 Nanoparticles [Volume 34, Issue 4, 2016, Pages 19-31]
  • Salamati, H. Effect of Isothermal Ageing on Structural and Magnetic Properties of Ni47Mn40Sn13 Ferromagnetic Shape Memory Alloy [Volume 34, Issue 3, 2015, Pages 29-38]
  • Salimi, M. Analysis of Structural and Magnetic Characteristics of Nickel Ferrite Nanoparticles Prepared by Hydrothermal Method [Volume 34, Issue 1, 2015, Pages 35-43]
  • Samadi, A. Effect of Al-5Ti-B Inoculant Addition on the Graded Microstructure of Centrifugally Cast Al-13.8 wt.% Mg2Si Composite [Volume 34, Issue 2, 2015, Pages 49-59]
  • Sedighi, R. A. Characterization of Nanonanocrystalline Mg-6Al-1Zn-1Si Alloy Powder During Mechanical Alloying and Subsequent Annealing [Volume 34, Issue 2, 2015, Pages 103-113]
  • Seifi, P. Analysis of Structural and Magnetic Characteristics of Nickel Ferrite Nanoparticles Prepared by Hydrothermal Method [Volume 34, Issue 1, 2015, Pages 35-43]
  • Seifollahzadeh, P. Fabrication of Mullite-Alumina-SiC Composites by In-Situ Reaction during Carbothermal Reduction of Inorganic Materials [Volume 34, Issue 3, 2015, Pages 1-11]
  • Shaban Ghazani, M. Fabrication of Ultra-Fine Grained Plain Low Carbon Steel through Dynamic Strain Induced Transformation during Integrated Extrusion Equal Channel Angular Pressing [Volume 34, Issue 4, 2016, Pages 73-85]
  • Shahverdi, H.R. Investigation of Crystallization Kinetics of Fe36Cr12Mo10 and α-Fe Phases in Devitrification of Fe51Cr18Mo7B16C4Nb4 Amorphous Alloy [Volume 34, Issue 1, 2015, Pages 45-53]
  • Shamanian, M. Investigation of the Mechanical Properties of AISI 316 Austenitic Stainless Steel and St 37 Low Carbon Steel Dissimilar Joint by Friction Stir Welding [Volume 34, Issue 2, 2015, Pages 89-101]
  • Shamanian, M. Microstructure and Corrosion Behavior Investigation of Al5083-H321 GMAW Weldment in Sea Water [Volume 34, Issue 3, 2015, Pages 107-115]
  • Sharifi, N. Transparency Effect of Electrolyte on Light Back-Scattering in Dye-Sensitized Solar Cells [Volume 34, Issue 3, 2015, Pages 59-67]
  • Shirali, A. Influence of Parameters of Quenching and Partitioning Process on Microstructure and Fraction of Retained Austenite [Volume 34, Issue 2, 2015, Pages 79-87]
  • Shoja Razavi, R. Fabrication of Yttria Nanopowder by Precipitation Method Using Micro Meter Powder [Volume 34, Issue 3, 2015, Pages 97-106]
  • Shoja Razavi, R. Fabrication of Yttria Nanopowder by Precipitation Method Using Micro Meter Powder [Volume 34, Issue 3, 2015, Pages 97-106]
  • Shokrvash, H. Fabrication of Ultra-Fine Grained Plain Low Carbon Steel through Dynamic Strain Induced Transformation during Integrated Extrusion Equal Channel Angular Pressing [Volume 34, Issue 4, 2016, Pages 73-85]
  • Soltanieh, M. Effect of Aluminium Injection into the Crystalizator on Type, Composition and Activity of Inclusions in Low Carbon Steel [Volume 34, Issue 1, 2015, Pages 9-23]

T

  • Tamizifar, M. The Effects of NH4Cl and Particle Size of Al Powder in AlN Whiskers Synthesis by Direct Nitridation [Volume 34, Issue 1, 2015, Pages 55-66]
  • Tavakoli, H. Effect of Aluminium Injection into the Crystalizator on Type, Composition and Activity of Inclusions in Low Carbon Steel [Volume 34, Issue 1, 2015, Pages 9-23]

V

  • Vajd, A. Fabrication of Ultra-Fine Grained Plain Low Carbon Steel through Dynamic Strain Induced Transformation during Integrated Extrusion Equal Channel Angular Pressing [Volume 34, Issue 4, 2016, Pages 73-85]

Y

  • Yazdkhasti, S. Preparation, Characterization and Comparative Study of Antibacterial Properties of Ag-TiO2 and ZnO-TiO2 Nanoparticles [Volume 34, Issue 4, 2016, Pages 43-52]
  • Yousefpour, M.A. Evaluation of Ability of Hydrogen Absorption in SAB-16/Pd Nanostructure Composite [Volume 34, Issue 3, 2015, Pages 13-27]

Z

  • Zakeri, A. Effect of Excess Al in TiO2-Al Powder Mixture and Susceptor Material on Microwave Synthesis of TiAl/Al2O3 Composite [Volume 34, Issue 4, 2016, Pages 53-60]
  • Zakeri, N. Study of Nano-Titania Addition on Mechanical Strength of Mullite-Bonded Alumina-Silicon Carbide Nano-Composites [Volume 34, Issue 3, 2015, Pages 49-58]
  • Zandrahimi, M. Effect of Current Density on Microstructure of Mn-Cu Thin Films produced by Electroplating Coating Technique [Volume 34, Issue 1, 2015, Pages 25-33]
  • Zare, A. Investigating the Effect of Microstructure on Oxidation Behavior of Ti47Al48Mn5 Alloy Synthesized by Mechanical Alloying [Volume 34, Issue 2, 2015, Pages 31-48]
  • Zeidabadinejad, L. Density Functional Theory Calculation on Improving the Photocatalytic Properties of Zinc Oxide and Cadmium Sulfide by Hybridization with Metal-Organic Framework [Volume 34, Issue 4, 2016, Pages 107-113]

ارتقاء امنیت وب با وف ایرانی